You are here


The X5 is a breakthrough in 3D printing, designed from the ground up for low-volume manufacturing. Capable of automatically feeding up to 12 plates onto its build bed and reloading during printing, it provides a continuous 3D printing experience.
(Coming in Sept 2018)

  • Printing technology: MEM (Melted Extrusion Modelling)
  • Extruder: Single
  • Nozzle diameter: 0.2mm, 0.4mm, 0.6mm
  • Extruder maximum temperature: 299℃
  • Extruder maximum travel speed: 200mm/sec
  • XYZ accuracy: 2, 2, 0.5 micron
  • Connectivity: USB cable, Wi-Fi, LAN and USB Stick
  • Touch screen: 7" Full Colored LCD Screen
  • Build volume: 180 x 230 x 200 mm (7.1" x 9.1" x 7.9") (XYZ)
  • Printed object accuracy: ±0.1mm/100mm
  • Layer resolution: 0.05/0.1/0.15/0.2/0.25/0.3/0.35/0.4mm
  • Build plate maximum temperature: 100℃
  • Calibration and leveling: Manual Calibration and leveling
  • Build plate surface: UP Perf, Heated
  • Pause to change filament type: Yes
  • Out of filament detection: Yes
  • Filament: UP Fila ABS, ABS+, PLA, TPU and more
to top